Compact milling head with a max. torque of 1,135 Nm

The very compact milling head with a max. torque of 1,135 Nm torque offers excellent accessibility for complex multiaxial machining.

The high torque is transmitted via a 2-step ZF-gear. The milling head can be equipped optionally with SK50 BigPlus or HSK-100.

Big rotary diameter of 2,700 mm

Workpieces with a diameter of 2,100 mm can be rotated and machined while the machine housing is completely closed. Optionally, the housing can be customised for turning even bigger parts with a maximum diameter of 2,700 mm.

2nd control panel at the rear

Optionally, a second control panel is available at the rear side, which can be activated at any time by means of the switchover button. This offers a perfect view of the workpiece and the tool even when the head is set horizontally.

Electric and hydraulic compensation

The compensation of the physical deflection of the beam is electrical / hydraulic controlled. This assures a highly precise movement of the Y-axis, with a maximum deviation of +/- 0.010 mm over a distance of 1,200 mm.

In addition, the hardened and polished guides are deep-hole drilled and connected to the automatic closed-loop water cooling circuit.