5-axis machining center
Combined milling and turning
With the spindle clamping and the optional rotary table, workpieces can be turned at a maximum speed of 400 min-1 (250 min-1).The time-consuming exchanging of the workpiece between different machines is now a thing of the past.
Trigonal milling head - Simply funky and ingenious
Due to the special arrangement of the A-axis, dihedral angles from 0° to +105° can be machined with only one axis. Milling with the trigonal head in the horizontal spindle position has the great advantage that X and Y-axes are continually loaded in the same direction. This reduces cross-stresses to a minimum.
X axis 1'800 mm Y axis 1'800 mm Z axis 1'210 mm A axis +/- 105 ° C axis 360 °
Main drive Spindle power 94 / 113 kW Spindle speed 12'000 min-1 Torque spindle max. 300 / 410 Nm DDT Spindle power 105 / 125 kW Spindle speed 3'000 min-1 Torque spindle max. 844 / 1'202 Nm DDT Spindle power 63 / 75 kW Spindle speed 14'000 min-1 Torque spindle max. 200 / 275 Nm
NC Rotary table
Dimension milling ø 1'400 x 1'200 mm Dimension turning ø 1'400 / ø 1'800 mm Max. Rotary diameter ø 1'900 / ø 2'200 mm
Tool changer, places 92 / 204 Max. tool length 600 mm Max. tool diameter 125 / 250 mm
Heidenhain TCN640 Siemens 840D sl
Machine weight ø 1'800 x 1'400 mm Machine weight ø 1'400 / ø 1'800 mm Max. load 4'500 kg Quantity pallets 2 / 3 / 4 /
Machine weigth 42'000 kg Dimensions length x width x height 6'200 x 6'500 x 3'900 mm
Pallet changer system
Automation concept matched to the machine
Even in developing a machine, we look for components and elaborate solutions that make it possible to keep the consumption of expensive resources such as electricity and air in daily use as low as possible. This not only helps to protect the environment, but also minimise the daily running expenses. The most important measures to increase energy efficiency are the following:
- Power regenerating drive systems
- Chip conveyors with interval function
- Coolant flushing with interval function
- Automatically deactivating suction system
- Automatic shut-down of auxiliary programs after the program cycle ends
- Leaktight valve technology
- Frequency-regulated coolant high-pressure pumps
- Weight-optimised moving masses
- Low-watt valve technology
- Patented spindle drive concept DDT
- Consumption-optimised pneumatic system
- High-quality servo axes
- Machine lighting with high-efficiency LED lights
- Use of high-quality components with high efficiency
The use of polymer concrete as base material requires around 30% less primary energy than equivalent cast body. And even the CO2 share can be reduced by 66%. The disposal of polymer concrete, too, is uncomplicated, because as regular construction rubble it can be recycled for new filling materials or soil stabilisation.
As a producer of machines with a single production location, a high level of own production and local supplies, we are able to reduce transports to a minimum. At the same time, our machines have a long service life, which adds to the overall positive balance.